Connect to the Switch Using EDM

Before you begin

  • Note the IP address of the switch.

  • Verify that you use a supported browser version.

  • Enable the web server using CLI.

About this task

Perform this procedure to connect to EDM to configure and maintain your network through a graphical user interface.

Procedure

  1. In the address field of your web browser, enter the IP address of the system using one of the following formats: https://<IP_address> (default) or http://<IP_address>.
    Note

    Note

    By default the web server is configured with the secure-only option, which requires you to use HTTPS to access EDM. To access EDM using HTTP, you must disable the secure-only option.

  2. In User Name, type the user name.
  3. In Password, type the password.
  4. Select Log On.
9039040-00 Rev AB